Wilhelm, S. M., “Risk Analysis for Operation of Aluminum Heat Exchangers Contaminated by Mercury”, Proceedings of AICHE Spring Meeting, Global Congress on Process Safety, New Orleans, April 2008.

S. M. Wilhelm, "Electron Injection from Semiconductor Electrodes in Liquid Ammonia." J. Electrochem Soc., 126, 207c (1979).

S. M. Wilhelm, K. S. Yun, L. Ballenger, and N. Hackerman, "Semiconductor Properties of Iron Oxide Electrodes." J. Electrochem., Soc., 126, 419 (1979).

K. S. Yun, S. M. Wilhelm, S. Kapusta, and N. Hackerman, "Capacitance Study of Thermally Grown Oxide Films on Iron." J. Electrochem, Soc., 128, 1668 (1981).

S. M. Wilhelm and N. Hackerman, "Photoelectrochemical Characterization of the Passive Films on Iron and Nickel." J. Electrochem, Soc., 128, 1668 (1981).

S. M. Wilhelm, Y. Tanizawa, C. Y. Liu, and N. Hackerman, "Photoelectrochemical Investigation of Semiconducting Oxide Films on Copper." Corrosion Science, 22, 791 (1982).

S. Kapusta, A. Viehbeck, S. M. Wilhelm, and N. Hackerman, "The Anodic Oxidation of Sulfide on Platinum Electrodes." J. Electroanal Chem., 152, 157 (1983).

S. M. Wilhelm, J. Vera, and N. Hackerman, "Transport of Hydrogen Through Pyrite." J. Electrochem Soc., 130, 2129 (1983).

S. M. Wilhelm and R. D. Kane, "Effect of Heat Treatment and Microstructure on the Corrosion and SCC of Duplex Stainless Steels in H2S/C1 Environments." Corrosion, 40, 431 (1984).

R. D. Mack, S. M. Wilhelm, and B. G. Steinberg, "Corrosion Testing of Metals and Alloys in Environments Containing Hydrogen Sulfide." Environment Sensitive Facture: Evaluation and Comparison of Test Methods, ASTM (1985).

S. M. Wilhelm and R. D. Kane, "Selection of Materials for Sour Service in Petroleum Production." Proceedings: Sour Service in the Oil, Gas and Petrochemical Industries, London, December (1985).

R. D. Kane, S. M. Wilhelm, and R. D. McIntyre, "Application of Corrosion Resistant Alloys in Oilfield Production." UK CORROSION/85, NACE/ICCORRS&T, November (1985).

D. R. McIntyre, R. D. Kane, and S. M. Wilhelm, "Slow Strain Rate Testing for Materials Evaluation in High Pressure H2S Environments." NACE CORROSION/86, March (1986).

S. M. Wilhelm and R. D. Kane, "Selection of Materials for Sour Service in Petroleum Production." J. Pet. Tech., October (1986).

S. M. Wilhelm and R. D. Kane, "Status Report: Corrosion Resistant Alloys", Pet. Eng. Intnl., (1987).

S. M. Wilhelm, "Hydrogen Embrittlement." Encyclopedia of Chemical Processing and Design, Volume 26, M. Dekker, New York (1986).

C. Shengmin, L. Changyi, S. M. Wilhelm, and N. Hackerman, "Instrumentation for Rapid Measurement of the Capacitance and Resistance of the Electrolytic Cell." Acta Physico Chemica Sineca, 2, (1986).

S. M. Wilhelm and J. W. Oldfield, "Effect of Elemental Sulfur on the Performance of Alloy 825 in Deep Sour Gas Well Production." Proceedings: Sour Service in the Oil, Gas and Petrochemical Industries, IBC, London (1987).

S. M. Wilhelm, "Galvanic Corrosion Caused by Corrosion Products." Galvanic Corrosion, ASTM STP 978, (in press) (1987).

S. M. Wilhelm, "Effect of Elemental Sulfur on the Stress Corrosion Cracking of Nickel Base Alloys in Deep Sour Gas Well Production", NACE CORROSION/88, Paper No. 77, (1987).

S. Cai, A. Viehbeck, N. Hackerman, and S. M. Wilhelm, "Calculation of Corrosion Rates by Extended Linear Polarization", Aeta Scientiarus Naturalium Universitatis Pekinensis, 2 (1987).

R. D. Kane and S. M. Wilhelm, "Compatibility of Stainless and Nickel Base Alloys in Acidizing Environments", NACE CORROSION/89, Paper No. 481, New Orleans, Louisiana (1989).

R. D. Kane, S. M. Wilhelm, and D. R. McIntyre, "Application of the Critical Pitting Temperature to the Evaluation of Duplex Stainless Steels", ASTM STP 1000, Philadelphia, Pennsylvania (1990).

R. D. Kane, S. M. Wilhelm, and J. W. Oldfield, "Review of Hydrogen Induced Cracking of Steels in Refinery Service, Proceedings Interaction of Steels with Hydrogen in Petroleum Industry Pressure Vessel Service, MPC (1989).

S. M. Wilhelm and D. M. Currie, "Selection of High-Alloy Tubulars for the 823 Field (Mobile Bay)", Proceedings SPE Production Operation Symposium, SPE, Oklahoma City, Oklahoma (1991).

S. M. Wilhelm, "Effect of Mercury on Materials in Ammonia Plants." Proceedings AIChE Ammonia Safety Symposium, San Diego (1990).

S. M. Wilhelm, "Use of Slow Strain Rate Tests to Evaluate the Embrittlement of Aluminum and Stainless Alloys in Process Environments Containing Mercury", ASTM STP 1210, Philadelphia, Pennsylvania (1993).

S. M. Wilhelm, "Methods to Combat Liquid Metal Embrittlement by Mercury in Cryogenic Aluminum Heat Exchangers," GPA, Proceedings 73rd GPA Convention, March (1994).

S. M. Wilhelm and D. Abayarathna, "Inhibition of Absorbation of Hydrogen by Steels in Wet Hydrogen Sulfide Refinery Environments," Corrosion, 50, 152 (1994).